Adjusting for a level impression
- Details
- Category: numbering machine
- Published on Saturday, 10 March 2012 17:54
- Written by shichang ding
- Hits: 3627
Leveling the numbering head is the most critical part of the set up process:
First loose the head lock (screw 1):
Second: Use a 3 part carbonless set, stamp in one location anywhere on the sheet.
You can check the impression for pressure as well as levelness. by level we mean a level impression. where the impression of 1st digit is the same pressure and impression as the 5th and 6th digit always favoring the 1th digit slightly.
Screw 3 and 4, for the head parallel position ：LEFT and RIGHT .
Screw 5 , for the front and back
If the impression is good, you can lock the screw 1.
